Cass Technology CASTLE S SERIES Uživatelský manuál stáhnout pdf (Strana 38)

CASTLE COMMANDO SERIES CONTROLLER – TECHNICAL OPERATION GUIDE

Test Keypad

Press ‘1’ to select [1-Tst Kpd] menu from the Test Menu.

Then the controller will display the following: -

This option is used to test the functioning of every keys of the keypad. User just

has to press the letter follows the sequence as display.

Test Watch Dog

Press ‘2’ to select [2-Test WD] menu from the Test Menu.

This option is to test the functioning of the WatchDog of the controller.

After pressing ‘2’ at the Test Menu. The LCD should display as follow: -

User just has to wait for few seconds until the controller reset. If the controller

does not reset, that’s means the WatchDog is not functioning.

Test Input

Press ‘3’ select [3-Test IP] menu from the Test Menu.

This menu item is to test the Input points.

- First 2 input will be add4 and add5 input signal.

- Input 3 and 4 are the main power down detector and low power input detector.

- Input 5 to 12 are the alarm inputs point.

Test Output

Press ‘4’ select [4-Test OP] menu from the Test Menu.

This menu item is to test the Output points.

CASS TECHNOLOGY SDN BHD(338857-X) 38

dd/mm DDD hh:mm:ss

1234567890*#abcd

dd/mm DDD hh:mm:ss

WD : Waiting for reset

dd/mm DDD hh:mm:ss

Rly(1-4) or 0 -Ret

dd/mm DDD hh:mm:ss

Input[1111/00000000]

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

Žádné komentáře

Cass Technology CASTLE S SERIES Uživatelský manuál Strana 38